View Single Post
  #3   IP: 97.86.46.15
Old 12-29-2008, 08:15 PM
baileyem baileyem is offline
Senior Member
 
Join Date: Jun 2006
Location: Tomahawk, WI
Posts: 175
Thanks: 0
Thanked 1 Time in 1 Post
replacing rear oil seal

Replacing the old oil seal with the engine still in the boat is no real hassle if you have reasonable access to the area. I found Don's instructions to be quite helpful....they are quite clear and follow a simple sequence that is easy to follow. I did buy two of the tools he sells to make the job easier: The output coupling puller and the output coupling holder were invaluable to me. The output coupling installer would have been nice, too, but the removing tool can be used to do the same thing if you buy longer bolts for it. If you run into major problems you can always call Don. He has never failed to be helpful when asked.
Good luck.

Mike
Reply With Quote