View Single Post
  #8   IP: 70.185.132.167
Old 12-01-2019, 02:09 PM
JOHN COOKSON JOHN COOKSON is offline
Afourian MVP, Professor Emeritus
 
Join Date: Nov 2008
Posts: 3,500
Thanks: 54
Thanked 855 Times in 629 Posts
Quote:
Originally Posted by ernst View Post
. My question is, how likely is it that I will break something in the process of removing it (like the studs),
Any thoughts welcome!
If the boat is back in commission start the engine and run it for awhile till it is good and warm. While the engine is still running loosen the nuts\bolts. The heat + vibration will help loosen them.
When you use the PBblaster tap on the nuts\bolts with hammer after applying to help it penetrate.

TRUE GRIT
Reply With Quote