View Single Post
  #1   IP: 23.135.32.138
Old 08-28-2019, 12:45 PM
ajgaines ajgaines is offline
Senior Member
 
Join Date: Aug 2019
Location: Alameda
Posts: 58
Thanks: 10
Thanked 0 Times in 0 Posts
Rust on inside of cylinders

I received this engine with some water in the cylinders. It sat that way for about 1-2 weeks before I was able to open it up and clean it out. It is currently seized and this is what the inside of the cylinders look like. Pictures are in reply.

What do you guys recommend for taking care of the rust? I've been spraying it with PB blaster continually, and been wiping it gently with blue paper towels, but it doesn't seem to clean it off. Does it only require honing? Full reboring? Total scrap??


Cheers!

Last edited by ajgaines; 08-28-2019 at 12:48 PM.
Reply With Quote