NCS, Welcome. I've done a few races on a Hughes 38 way back in the day.
I am hoping that your oil pan hasn't failed, but maybe..also, any of the other oil outlets, like for the oil pressure gauge, or a possible pressure switch, if you have one, can fail too..sometimes those gauge senders are attached to iron pipe which might fail. Check the port side of the motor.
Does the oil drain out with the motor running (maybe one of the above) or not running (maybe a failed oil pan)?
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
|