View Single Post
  #10   IP: 97.93.70.7
Old 08-15-2019, 05:12 PM
Dave Neptune Dave Neptune is online now
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
What is your idle speed? Try a few more RPM's and give the idle screw a 1/4 turn in. Often if your on the low edge of idle speed going into reverse is "easier" on the idle due to the gear reduction however going into forward the prop is more efficient and the load on the idle much more as it is a direct drive. May just be this simple.

Dave Neptune
Reply With Quote