Quote:
Originally Posted by JOHN COOKSON
If you had this much moisture in and around the distributor cap did you clean the distributor towers where the big wires plug into? The little boots that are on the wires that fit over the towers look good but moisture can at times still get past them and cause corrosion.
You can clean the towers with apiece of sandpaper wrapped around a pencil or of course buy a new distributor cap. You may have spark at all four plugs but not the hottest spark possible if there is corrosion in the towers.
TRUE GRIT
|
All contacts in the cap itself look good. Wire ends look good. I suppose it couldn’t hurt to clean them a bit.