View Single Post
  #22   IP: 137.103.82.227
Old 02-13-2020, 05:12 PM
joe_db's Avatar
joe_db joe_db is offline
Afourian MVP
 
Join Date: May 2009
Posts: 4,474
Thanks: 49
Thanked 1,026 Times in 721 Posts
The other issue - running temps.
My FWC setup would routinely hit 200-210 degrees at high power settings in warm water. That is well under the boiling point of glycol mix with even a 3 or 5 PSI cap, but that much heat in the boat was annoying and it could cause vapor lock on long trips on a hot day.
I went back to RWC that easily holds under 140 to consider my next move, either a better FWC system, a vapor purge line, or both. I don't think your temps are too far out of line running max power in warm water.
Reply With Quote