Quote:
Originally Posted by JOHN COOKSON
Good to hear the engine is running normally. These sort of victories are always sweet. I've been through a few of these engine drills myself. Back in the "good old days" there was no Moyer forum and no internet for guidance.
It probably has been mentioned already...... What is your fuel filter system?
At a minimum there should be some sort of filter between the tank and fuel pump to catch the bigger particles and a "polishing filter" between the fuel pump and carburetor to stop the smaller particles.
ex TRUE GRIT
|
Thank you...yes, little victories mean the most!
As for the fuel filter system...It is actually reversed from the previous owner, but only for reasons of they way everything fits in the engine compartment. There is a small filter between the fuel pump and tank, and then the Raycor fuel/water separator between the pump and the carburetor. I will reverse this order this weekend, and add a fuel pressure gauge as well...
Thanks everyone here for all the help...without you guys and youtube, I would have been lost!
Adam