View Single Post
  #1   IP: 71.224.192.243
Old 04-29-2012, 06:32 PM
a.flood a.flood is offline
Member
 
Join Date: Aug 2011
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Carburetor Bleed Valve

For the Winter and on some other occasions, I've had to remove the bleed stopper screw from the bottom of my carburetor. This is useful to access the quality of the gas coming to the carb.

This on my boat is very hard to get at and gas can spill and some awful language from my mouth too.

So a little kit would be nice with a simple valve that replaced the plug and possibly a small tube that could be either attached or left on this during operation.

Aongus
Sabre 28
Reply With Quote