Originally posted by GregH
View Post
This owner recently had another bleed screw break. The screw is small, threads into a banjo and has a tiny hole drilled transversely for a fuel path. It broke off right at the tiny hole.
I should say he has been chasing a small air leak for a while and his frustration level is at max. I was all for testing to find the problem and solve it directly but a week ago changed strategy. I suggested it might be time for the full Monty, make the entire fuel system as good as it can be, make it his own. One of the potential issues has been he pulls a hose off of a barb to purge air from a changed filter with the mechanical pump's hand bail or an auxiliary hand pump which damages the ID of the hose every time. It's on the suction side of the engine lift pump so a leak would be difficult to find. With a plumbed in polishing system purging is done with a turn of a valve and a flip of a switch. No hose removal, no hose damage and less diesel stank.
Comment