View Single Post
  #2   IP: 24.61.95.61
Old 10-21-2019, 07:58 AM
ArtJ ArtJ is offline
 
Join Date: Sep 2009
Posts: 2,177
Thanks: 221
Thanked 65 Times in 50 Posts
Exclamation Suggested tool

This is very hard to reach the main passage plug on the Tartan34c when removing the
main passage plug to flush carb.There is no room for a container to hold
the ejected gas - allowing 1 or more pints of gas to be flooding into
the bilge under the engine -
very dangerous.
What if a barbed hose fitting was available that mates with the special main passage threads?
Then a 2 foot long hose could be attached allowing
the ejected gas to be collected in a convenient placed container. Possibly
even a in line shutoff valve rather than the easily lost plug?
Reply With Quote
The Following User Says Thank You to ArtJ For This Useful Post:
TimBSmith (09-08-2020)