View Single Post
  #2   IP: 32.211.28.40
Old 07-31-2020, 09:10 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
There are 3 bolts holding the coupling to the transmission flange (pc 12). Remove them and you can slide the coupling and shaft aft until the coupling hits the stuffing box. This will give you room to access and remove the nut holding the transmission flange. With the nut removed, you can use the 3 coupling bolts to jack the flange aft enough to get the wire out.
Reply With Quote