Thread
:
What dimwit thought of that?
View Single Post
#
5
IP: 97.93.70.7
11-16-2019, 12:22 PM
Dave Neptune
Afourian MVP, Professor Emeritus
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Fude for thought
Neil, per Ed that is a nice beefy weld. You could just saw the fitting off and then drill out the old tube. Then perhaps there will be enough material to re-tap larger and install a new tube.
Dave Neptune
Dave Neptune
View Public Profile
Find all posts by Dave Neptune