Quote:
Originally Posted by Whippet
Will soon be on the hard, and I have a long list of winter to-dos, some of which will require starting up the old girl for brief few second periods, just to make sure all done correctly (after installing EI, new racor and fuel lines, new carb, various rewiring, OPSS, etc, etc).
Question is, if i pull impeller, I assume the block antifreeze will stay just where it is and not belch out the transom, and all good for the next -20 day. Correct assumption? (I am raw water cooled).
Thanks for help on a simple one.
|
No need to pull impeller; once winterized and valve is off, a few seconds won't matter...it will belch a bit of antifreeze but that is all that's in there once winterized anyway. Only time you would have a problem is if you draw water back into the system.
I'd do all my repairs, upgrades etc and then winterize...