Thread
:
Looking for advice on an Atomic 4 repair / replacement
View Single Post
#
61
IP: 107.77.97.101
05-19-2019, 06:05 PM
infy
Senior Member
Join Date: May 2019
Posts: 63
Thanks: 0
Thanked 4 Times in 4 Posts
If the head is warped it has to be machined or replaced because it won't hold compression when reinstalled. You use a feeler gauge and a straight edge in a cross corner to corner to check if clearance is in spec.
infy
View Public Profile
Find all posts by infy