[pcupach]

I installed a Max Prop 3 Blade 12inch prop this winter.
I have a Ranger 33 with an Atomic 4 1:1 direct drive transmission.
I removed a folding 2-blade Martec prop.
-I was experiencing a gross amount of prop walk with the Martec 2 blad folding prop.
--The expectation is: The 3 blade Max Prop will reduce the prop walk I have been experiencing with the Martec 2 blade folding prop.

The removal of the Martec prop was simple, I soaked it down with PB Blaster a few days prior to trying to remove it.
The Maxprop install was straight forward. The guys at PYI Maxprop provided the pitch ratio for the A4 and the settings I needed.
Be sure to order the grease gun and grease from them when you order the prop...that will save you time delay.
Ill post the pitch setting and performance info later this summer.
Im still waiting to get back in the water...