View Single Post
  #2   IP: 97.93.70.7
Old 05-12-2019, 10:05 PM
Dave Neptune Dave Neptune is offline
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
When replacing the impeller did you make sure it is the same "thickness"?
Are you sure the pin or key was in the impeller so the shaft would drive it?
If you have water to the pump priming is likely not the answer.
Is the water valve open?

Dave Neptune
Reply With Quote