View Single Post
  #10   IP: 32.211.28.40
Old 04-15-2019, 08:52 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
DO NOT install a squeeze bulb for priming. Those are for outboards where the fuel system is out in the breeze.
With a mechanical fuel pump, there's a wire bail for priming on the side of the pump. With an electrical fuel pump, you can prime by using a crescent wrench to short across the oil pressure safety switch. If you have an electric fuel pump but no OPSS, your shopping list just got longer.
Reply With Quote