Thread: Idle & RPM
View Single Post
  #4   IP: 97.93.70.7
Old 03-11-2019, 11:44 AM
Dave Neptune Dave Neptune is online now
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
Red face Many things perhaps

Greg, you may have there issues as the +/- I gave you are for a good tune as far as all else is concerned. Timing, sticky advance weights, float level, any kind of a vacuum leak and the carb internal seals all can cause adverse idle conditions which will render proper adjustment of the idle mix most difficult and almost impossible to get set.

What is the state of tune from above? Any recent work on the carb? Did you check for any vacuum leaks?

Can you describe what has been done and what is currently being tried?

Dave Neptune
Reply With Quote
The Following 2 Users Say Thank You to Dave Neptune For This Useful Post:
Administrator (03-11-2019), thatch (03-11-2019)