View Single Post
  #8   IP: 32.211.28.40
Old 01-24-2018, 08:01 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
I've done the remote mount of the pressure sender and the OPSS. I used an 18" length of hose meant for a grease gun (Home Depot stock). Don't forget to run a ground lead to the block.
I also tried the solenoid fuel shutoff, but wasn't comfortable with it and changed it out for a ball valve. Perhaps if I'd had the fuel pressure gauge at the carb inlet (which I now have), I would have kept the solenoid valve.
Reply With Quote