View Single Post
  #9   IP: 24.152.132.140
Old 06-11-2018, 07:26 PM
ndutton's Avatar
ndutton ndutton is offline
Afourian MVP
 
Join Date: May 2009
Location: Torrance, CA
Posts: 9,619
Thanks: 198
Thanked 2,208 Times in 1,425 Posts
Quote:
Originally Posted by dwkfym View Post
Thanks. It is definitely not there.
If i 'tighten' the nut, as to make reverse engagement easier, does that make the neutral zone wider or smaller? I will wire in safety wire from that bolt to the adjusting nut after adjustment.
Smaller.

Good on you for securing the adjustment nut, otherwise it will fall out of adjustment readily. The original spring clip is intended to be able to adjust it without removing the clip. Search Kaminsky Modification on the forum for a great aid to that adjustment (must have the spring clip for the Kaminsky Mod to be viable).
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
Reply With Quote
The Following User Says Thank You to ndutton For This Useful Post:
Administrator (06-11-2018)