|
And be careful not to let the shaft slide out when you remove the set screw. If you have the space..a simple hose clamp might keep the shaft in the boat. I would also have a bung/plug for the shaft log on hand just in case there is an unexpected problem. If you don't have room...you'll have to haul the boat..might as well power wash, and prep the bottom for fresh paint if you have the means.
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
|