Quote:
Originally Posted by ndutton
By all means make a thorough check on all the previous suggestions but there's another possibility inside the reversing gear housing. It's possible you've lost the roller situated in the end of the reverse adjusting bolt. It rides on the tapered reversing bar that slides horizontally fore and aft. Check page 6-3, lower right in your MMI manual.
|
I'm having trouble visualizing this but the nut seemed to spin without much way of securing it. Would this have to do with it? I do have *some* reverse ability. At the dock, at idle, it will start spinning in reverse and it makes the right noise.
Also, thanks everyone.