|
This is not my strong suit. But based on what I have on the MC.
a. Think about using a GFCI receptacle immediately after the breaker. Then feed all other receptacles from there.
b. That is how I have the MC set up. Wire the two "house" batteries in parallel. Selector switch 1 is "house' 2 is "start".
c. Based on the assumption that all batteries are the same type, size and age/usage. Your 1/both/2/off selector switch will do what you need. Each charging option should have its on control.
d.
e. I have a small, 150 watt, inverter to charge my lap top etc. I would not want to use 12V to cook.
f. May be more than you need. Charging systems need to be sized with the battery bank.
Others will have more info.
Dan
S/V Marian Claire
|