It's always flattering to have an old thread "resurrected".
A problem like this can be as simple as a poor connection to ground. Double check (clean) the main connection to ground on your engine. You mention a recent re-wire but this merits attention none the less.
In your no-start situation, do you hear the loud "clunk" of the solenoid throwing the starter gear forward but no starter whirring? Or do you get the starter to turn but with no engagement? If it's the first case, the previous comments are all valid. For the second I would think you have an alignment problem or compatibility question between the starter and the flywheel.
__________________
Kelly
1964 Cheoy Lee Bermuda Ketch, Wind and Atomic powered
|