|
Check the control cables.
Take the trany control cable off and then shift into forward with both the cable and the lever on the side of the trany. See if the cable position is correct when both the control lever and trany lever are in forward.
When you are "messing' with the carburetor you are probably moving the control cable not the throttle butterfly.
Most of the time problems like this happen because the ends of the cable are not fixed down securely.*
TRUE GRIT
*Edit: Make that the ends of the outer cover not being fixed down securely.
Last edited by JOHN COOKSON; 07-19-2018 at 10:58 AM.
|