If the threads match up, typically 1/8" NPT, there is no problem cutting some length off the zinc itself. I had to do that to fit in my HX. I probably used a hacksaw or dremel tool. Which reminds me, if I can't remember what I used to cut it, I probably need to replace it!
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
Last edited by sastanley; 02-13-2019 at 10:36 PM.
|