View Single Post
  #13   IP: 206.125.176.3
Old 09-22-2011, 12:14 PM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
Question

I am guessing my regular run-of-the-mill multi-meter doesn't do dwell.

edit - steve, sorry I missed your post until now. Yes, my failed coil was remotely mounted, as shown in this picture taken earlier this spring. That is actually the dead coil, and the location where it lived the last 26 months since it was new in 2009. My original bracket rusted off, and the mounting bolts are solid in the block, so I just left them there. It would be a bear to remove them to re-mount a coil to the engine.
Attached Images
 
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif

Last edited by sastanley; 09-22-2011 at 02:38 PM.
Reply With Quote