View Single Post
  #6   IP: 67.169.215.221
Old 05-25-2020, 04:33 PM
ronstory's Avatar
ronstory ronstory is offline
Afourian MVP
 
Join Date: Feb 2016
Posts: 404
Thanks: 106
Thanked 208 Times in 152 Posts
Remove the bolt and carefully fill with thicken resin or epoxy and let set and dry. Then drill out a hole so it is sized for the bolt minus the threads and then install the bolt.

If it is too tight, just drill it a touch bigger but you want it on the tighter side.
__________________
Thanks,
Ron
Portland, OR
Reply With Quote