View Single Post
  #4   IP: 206.230.48.34
Old 04-03-2008, 08:48 PM
tenders tenders is offline
Afourian MVP
 
Join Date: May 2007
Location: Harlem YC, City Island, NY
Posts: 1,439
Thanks: 46
Thanked 259 Times in 170 Posts
Quite possibly, the "B" in your diagram should be connected to the blower intake and the other end should be loose in the lowest part of the bilge.

It's helpful, I think, to have hose "C" attached just like it is to the forward-facing intake cowling. It allows any splashing to be directed straight into the bilge instead of meandering through everything from the deck, through the lockers, down to the bilge.

Last edited by tenders; 04-03-2008 at 08:51 PM.
Reply With Quote