View Single Post
  #7   IP: 32.211.28.40
Old 01-03-2019, 10:07 PM
Al Schober's Avatar
Al Schober Al Schober is offline
Afourian MVP
 
Join Date: Jul 2009
Location: Uncasville, CT
Posts: 2,002
Thanks: 16
Thanked 578 Times in 405 Posts
Lots of stuff you can pour in then pump out, but nothings going to do much good (no circulation) until you can run the engine. I'd pour in a mix of 50/50 kerosene and motor oil (30W) and run the engine for about 10 minutes at idle - just let things circulate and slosh a bit. Too bad (or maybe good) that I can't get the wife's immersion blender in there! Pump that out, then put in a load of decent oil. Run it for a half hour and see how it looks. If you still have a mousse, some more flushing is needed.
Reply With Quote
The Following 2 Users Say Thank You to Al Schober For This Useful Post:
Dave Neptune (01-05-2019), nyvoyager (01-03-2019)