Quote:
Originally Posted by JimG
I've always threaded a small plastic tube down my dipstick to pull out old oil, but the process is pretty slow. I recently discovered on my other boat, that the Yanmar dipstick goes right to the bottom of the sump and I can just connect a larger hose to the dipstick itself, and extract all the oil quickly. I use one of those hand pumped vacuum oil removers, and the differences is 10-15 minutes versus 30 seconds.
Anyone know if the same trick works for an A4 (late model)?
|
I have never heard of that trick used with an atomic 4, and since this esteemed group has tried and reported on almost everything, I doubt if it will work. I also use a vacuum oil extractor (topsider), and I found shortening the plastic tubing as much as possible speeds things up.