View Single Post
  #6   IP: 137.103.82.194
Old 01-21-2019, 03:11 PM
joe_db's Avatar
joe_db joe_db is online now
Afourian MVP
 
Join Date: May 2009
Posts: 4,474
Thanks: 49
Thanked 1,026 Times in 721 Posts
Quote:
Originally Posted by Kevinstone View Post
Hi guys, does anyone know what the correct type of tubing for a mechanical oil pressure gauge should be? Can I use rubber fuel line? What's the maximum length for the tubing? I think 5-6 feet would get the gauge where I want it.
You need something rated for at least 300 PSI. Copper is common, but you need a flexible section between that and the engine. As mentioned, grease gun hose is a cheap way to acquire such a thing. Gauges usually come with cheap nylon hose I do not trust at all.
5-6 feet should be no issue. I could see a really long line on a really cold day giving false low readings.
Reply With Quote