View Single Post
  #139   IP: 174.255.137.223
Old 08-01-2020, 03:52 PM
Ando's Avatar
Ando Ando is offline
Senior Member
 
Join Date: Jul 2019
Location: San Pedro, CA
Posts: 247
Thanks: 333
Thanked 58 Times in 38 Posts
See comments directly above.

Wet compression test results (I put MMO in each cylinder first, which wasn’t the best idea...should have put it in each individual cylinder prior to testing because the other three cylinders shot out MMO in the first test):

Wet test 1: 200, 120, 120, 115

Just to be sure
Wet test 2: 165, 118, 120, 115
*test 2 was done without placing any more MMO in each cylinder (ie I put MMO in each then tested each cylinder twice and so the MMO was probably all shot out during the first test of the first cylinder).

Last edited by Ando; 08-01-2020 at 03:55 PM.
Reply With Quote