Marty, I did this when I re-wired the boat years ago. A mini bus-bar is a great idea.
I feed the coil +12v from the ignition circuit with a dedicated wire, and then feed the "accessories" that we want to put on the coil(+) to the "ignition bus bar". If you get some nice, but spendy Blue Sea stuff, you can use little jumpers they sell on their bus bars to "share the love", or spread the load.
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
Last edited by sastanley; 10-14-2018 at 10:45 PM.
|