Thank you ndutton ...good info on the coil!
As for the plug wires I think I did swap them to test but don't actually recall so I need to try this again.
I remember the compression to be all cylinders around 80 +/-.
I do remember that because of the last two not firing the exhaust would have fuel in the low part (10 degree angel after the manifold exit) and that's when I found a hole in the exhaust pipe. Dripping fuel down started to have a strong smell and making this job more dangerous.
I have a picture of the exhaust and the plug wires
Last edited by oceanwatersailor; 03-13-2014 at 08:47 AM.
|