Quote:
Originally Posted by goodoldboat
I was just thinking about the remaining gasket material that may or not be adhered to the engine block ...
what is the best way to remove the remaining material , I am thinking that this Pump is on the engine since 1977 ..
|
Very carefully.
I don't think you will have a problem. If you do have to scrape first try something softer than brass to scrape with; maybe a plastic or wood wedge. If there is any thin film left acetone on a green 3M pad might work.
TRUE GRIT
Edit: The engine is steel so you can be a bit rougher with it if any gasket is stuck to it.