Thread: no power
View Single Post
  #6   IP: 71.178.80.35
Old 09-05-2018, 10:45 PM
sastanley's Avatar
sastanley sastanley is online now
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
If the head is off, I would 100% recommend you turn the motor over by hand to observe valves..Also, I would individually inspect each valve while open and closed to make sure there is no build up on the valve or a bad valve seat and make sure it is sealing effectively. A little carbon on the valve can wreak havoc on compression. If a valve has any issue, the time to fix it is while the head is off.
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif
Reply With Quote