|
Chris
Now it is time for step 2.
If it will work in your engine space, get rid of the 90 degree barbs and go to straight barbs on the manifold inlet and outlet. 90 degree barbs are famous for plugging up with crud.
I've been around this mulberry bush with the 90 degree barbs. After I went to straight barbs the problem disappeared.
You really need to totally flush the manifold. Attach the hose to the manifold inlet right to the faucet. Attach a hose to the outlet and turn the faucet on full blast. I think the directions were posted earlier in this thread.
TRUE GRIT
Edit: See post #17
Last edited by JOHN COOKSON; 05-17-2018 at 07:23 PM.
|