|
Done and done
Yes right after this occured I removed the spark plugs to check for water in the cylinders, added some oil to the cylinders and hand crank it over. I have also removed the manifold and pressured tested it as well as replacing the gasket. The old gasket was so squashed and dirty you could hardly tell it was there! Now once i get my exhaust flange reattached I am going to try running it again.
P.S. this whole water situation happen last fall, I work away on tugboats and haven't had time or resources to tackle the issues again until now. I have been occasionally hand cranking the engine over throughout the winter. I had drained the block and water jacket exhaust down before winter.
|