View Single Post
  #2   IP: 162.22.248.100
Old 10-08-2018, 03:35 PM
rickinnj's Avatar
rickinnj rickinnj is offline
Senior Member
 
Join Date: Dec 2010
Location: South Joysee
Posts: 103
Thanks: 3
Thanked 4 Times in 4 Posts
There's a bolt and hold-down clamp at the base of the distributor on the reversing gear side. I believe it's a 9/16". If you pull up the 360 view of the engine on the home page and spin it around to the reversing gear end of the motor, you'll see it at the base of the distributor.

Hope that helps
__________________
Rick Bushie
s/v Anchovy, 1971 C&C 30-1, Hull #1
Tolchester, MD
Reply With Quote