dry plugs
Sure sounds like a gas related problem. Maybe you fixed the initial gas supply problem (carb and filters) but now have a new problem....
When you reattached the carb did you set up the throttle cable properly? If it is staying shut when you think you have full throttle, that would of course keep gas from entering manifold. Similarly, take off the flame arrestor and confirm that the choke is fully closed when you give it choke. Either of those cables can look right but slip.
Are you sure the carb- manifold connection is air tight now? An air leak there keeps manifold from sucking gas up to plugs. As they say, ask me how I know.
Don't forget to shut off water intake when you do a lot of cranking.
Good luck,
Marty
__________________
Marty
1967 Tartan 27
Bowen Island, BC
|