Thanks for the input Bill & Ed. From the very beginning I must admit that Don suggested that I perform the "simple" pressure test. Given the difficulty of changing the valve springs with engine in the boat, which, I just completed two weeks ago, to perform a pressure test would seem like an easy thing to do. Ed, before I go further I will pressure test the motor after I get it back together. I ordered the gaskets that I need to re-assemble the motor this morning so will keep the forum posted with my findings.
Obviously, my hope is that I made a mistake in my first job, which I would much rather admit than any other outcome.
Last edited by JOLLYBOAT; 07-06-2011 at 08:30 PM.
|