View Single Post
  #163   IP: 74.107.30.21
Old 11-13-2018, 10:41 PM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
It is a small job, but a super important one. I second Neil's suggestions in the same order. Someone that can roll the equipment down the dock from their truck may be the cheapest in the long run..Do NOT rely on those rails to withhold any impacts or loads in the meantime..it will only worsen, or catastrophically fail.

Probably the absolute cheapest is, if you do not mind the labor, you could yank it off and drive it to a qualified welder and re-install it.
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif
Reply With Quote
The Following User Says Thank You to sastanley For This Useful Post:
CajunSpike (11-14-2018)