View Single Post
  #5   IP: 97.93.70.7
Old 04-12-2019, 04:36 PM
Dave Neptune Dave Neptune is online now
Afourian MVP, Professor Emeritus
 
Join Date: Jan 2007
Location: Grove, Oklahoma
Posts: 5,035
Thanks: 711
Thanked 1,289 Times in 839 Posts
That water injection point needs to be at least 3~4 inches further downstream.
You could plug it and add the MMI injection Tee below the end of the elbow.
Also check the manifold to see that it has no internal leaks as well.

Dave Neptune
Reply With Quote
The Following 2 Users Say Thank You to Dave Neptune For This Useful Post:
Administrator (04-13-2019), overez (04-12-2019)