Moyer staff.... will your split coupling mate up with the 3 bolt engine coupling half as is?
To explain better, if I keep the original coupling half bolted to the motor, will the back half you sell, correctly attach to it.
Diameter of current coupling is 3/4". Key appears to be 3/16th.
Original rear coupling has 3 holes for bolts to pass thru, not threaded.
Front 1/2 has 3 threaded holes. Bolts have 9/16" heads.
__________________
Bill L.
1972 Ericson 27
Hull #61
Atomic 4
Last edited by CajunSpike; 06-17-2018 at 09:38 PM.
|