Quote:
Originally Posted by Ajax
John-
How many quarts do you usually manage to extract?
|
~3 1/2 quarts. Maybe a little less. I can guestimate because I pump the oil out into a gallon plastic jug.*
I tape the aluminum tube to the trany shift lever once I find the "sweet spot" in the trany so the tube stays put and doesn't hop around. Then I pump with my hand pump until I see bubbles in the tubing that goes to the pump. Then I yank the aluminum tube out of the dipstick hole, and while holding a paper towel around the end, get it into the gallon jug and the whole assembly up to the cockpit or on the dock.
TRUE GRIT
*Put the gallon jug in a mop bucket so it doesn't tip over. Guess how I found out.