View Single Post
  #30   IP: 67.244.39.117
Old 06-13-2018, 11:10 AM
smosh smosh is offline
Senior Member
 
Join Date: Apr 2018
Location: Cape Elizabeth, ME
Posts: 28
Thanks: 1
Thanked 1 Time in 1 Post
I will measure coil voltage. I believe we did that this past weekend, but i can't say 100% for sure what it was. (i was up in the cockpit with the key)

To measure the voltage at the coil, positive lead on the tester on the coil +, and negative tester lead grounded to the block, or to the negative on the coil?

John, completely bypassing the fuse and 'new' wiring, still doesn't work. The fuse looks ok anyway, and i had initially made sure it was seated and all connections to the new Facet were good...new connectors, good crimp, etc.

I hope to get out to the boat this afternoon to test it out.
__________________
Stella Blue - a 1986 O'Day 272 with a Volvo Penta MD7A diesel

former owner of Euphoria - a 1971 Tartan 30 with an Atomic 4
Reply With Quote