Quote:
Originally Posted by dwkfym
I'm having trouble visualizing this but the nut seemed to spin without much way of securing it. Would this have to do with it?
|
No, the roller is not part of the adjustment. To hold the nut in place there's supposed to be a spring steel hairpin clip that rides against two flats on the adjustment nut. Please take a close look at the picture in the MMI manual that I referenced previously. The roller is identified in the picture. The nut locking clip can be seen in this post.
__________________
Neil
1977 Catalina 30
San Pedro, California
prior boats 1987 Westsail 32, 1970 Catalina 22
Had my hands in a few others
|