Thread: Ignition Crank
View Single Post
  #8   IP: 206.125.176.3
Old 11-11-2009, 08:43 AM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
+1

Hi Mark,
A diagram would be great. I have a C-30, and the problem is I do not think the Moyer designed crank has enough clearance since my engine is surrounded by a box, so I have zero clearance in front & would need an extension as well.

I am considering a ~1" diameter hole that I can plug for the purpose of a visual on the roll pin for setting timing & hand cranking if I ever need it using a tool similar to the design you describe. No sense in re-inventing the wheel!
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif
Reply With Quote